|
Ford has used some downright ugly interior
colors throughout the years. Not only were the colors unappealing,
but matched up with funky cloth fabrics and uncomfortable seats,
made for an uninspiring driving environment.
The '80's and early '90's Mustang 5.0's were perhaps some of the
worst victims of Fords ugly stick beatings. For cars that were supposed
to be powerful, sporty, and representative of the original pony
cars, the stock interiors were often an eye straining disco red.
While many original buyers upgraded to the leather seats deluxe
interiors (typically in neutral gray or black) most of the cars
on the dealers lots had the base level interior to keep the sticker
price down.
In the case of our '88LX project car, we had no say in the interior
because we bought the car used. After a couple years of sitting
in saggy seats, and being embarrassed of bringing dates into the
shag red room, we had enough - it was time for some wall to wall
redecoration.
Ideally we would have sourced a similar Fox body with all black
interior. However black, especially leather, is a hard option to
come by in a donor LX or GT. Usually if the car had black interior
pieces, they've been striped and sold well before the car is sent
to the wreckers.
So we opted to get a little more creative.
The dash and console on our '88 was not all red, but a mix of red
and black -which actually looks pretty sporty. It was mainly the
faded red velour seats and carpet that brought the ambiance down.

'94 GT Leather seat with power. Drops
right into earlier Fox Mustangs.
|
Seating Arrangements
We visualized that a new black carpet, and
new late-model leather seats, would do wonder for the project car.
We found a virtually brand new set of '94 GT black leather seats
for $400. You can usually find similar deals through online classifieds.
From time to time Mustang tuners like Saleen, Steeda and the like
will sell new take-out seats for a good price.
The '94 and up Mustang GT leather seats are
perhaps the nicest Ford has offered in any car. They offer side
and thigh bolsters, power lumbar, and power driver-side controls.
In this article we'll show you the simple modification required
to make these seats work.
|
|
The Rug

The new ACC carpet is pre-moulded and
offers a nicer pile. Note the driverside scuff mat integral
to the rug. |
The original 12 year old red carpet had
become a disgusting mess, filled with mashed fries, coffee, boogers,
and whatever else the previous owners threw at it. We decided to
redo the entire passenger compartment and hatch area carpeting with
a new carpet kit from Auto Custom Carpets (ACC).
The black Dupont Nylon "cut pile" carpet is pre-molded
and cut to the floor pans, ensuring a perfect fit. Unlike the stock
carpet, the ACC carpet features a rubber backing which will keep
and spills and moisture from getting through. For about $200 you
can obtain the main carpet, hatch carpet, and seat backs. (If your
hatch area rug is in good shape, the front piece is only about $100
from most mail order catalogs.) We'll take you through the installation
procedure in this article.

New reproduction door to body seals,
available for under $30 per side, or a bit more for the Ford
originals. We obtained these from Texas Mustang Parts.
|
Door to Body Seals
The final piece of our interior renovation
was to keep the new seats and rugs dry. To accomplish this we picked
up new door to body seals. Virtually every Fox Mustang we've ever
seen suffers from torn seals down near the kick panels. Dry rot
and just plain compression fatigue all add up to result in water
and wind seepage. We figured this was the right time to fix the
problem. At $30 a side, it's not a bad investment and will surely
last another 10 years.
Continue to Installation
|