never mind stupid me. I looked through the archives, found that some stated the governor feeds were blocked at the separator plate. This may be the case for me, the valve body didn't seem to have many outputs for the case when I was looking at it. I will closely inspect it, and if the governor lines are not going through the separator plate then I don't care.

This is probably the case, since the person was talking about a PA Supercomp C4, and stated it had no governor. The valve body I have is the same one that comes on the Supercomp (you can order it without the T-Brake).

So this is probably the case, and whoever told me this at PA just didn't want me to mess with anything....

Justin