<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2004-09-02 02:48, FORDNUT wrote:
I'm looking for a stock 4brl cast iron intake that will fit the
351c heads to the 351w block to make a 500+hp 375 stroker
motor. These intakes were found and used on the Boss 351
Mustangs.And they were factory production parts.
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>
There was no such animal from Ford! The intakes on Boss 351's were aluminum, and 351 Windsors were cast iron. The two do not interchange. Yes, its possible to put 351C heads on a 351W block, but the C intake will not fit because the two blocks have different deck heights. Also, the Windsors cooling system needs to have provision for coolant to exit the intake manifold...something a Cleveland manifold does not have.