I just got a 331 Stroker Crank.

Can I use a standard 302 Piston with a 3.25" stroke crank and 5.4" rods in a stock block? I want to get my final compression to about 11.5:1,without spending 700bucks on pistons. Can this be done in the300-450range with a hypereutectic piston?

All suggestions welcome, thanks

_________________
306,Hyper Pistons,Edelbrock Performer RPM "Typhoon" Intake (Ported), 1969 351W Heads (ported and shaved to 50cc), 10:1 Compression Ratio, F-303 Cam, Harland Sharp 1.6 Ratio Roller Rockers, A9L ECU, 70MM Cobra MAF, 24lb/hr Injectors, MAC Equal Length Heade

<font size=-1>[ This Message was edited by: lucheski on 2/9/05 4:34am ]</font>