I'll agree with clevlandstyle, useing ATV in a tube can become a problem when the mating surfaces squeeze together. If you have a little to much on an given area it squeeses into the pan breaks off, little pieces are then introduced into your tranny. It's not that the ATV degrades with the type of tranny fluid used it's just you increase your chances of screwing up the tranny if it was to break off. I guess if that the risk you want to take then I say good luck. personnaly I thinks it's easier to get a new gasket, or pan and not have to worry aboult rebuilding your tranny. Just my 2 cents.

[img]/phpBB/images/smiles/icon_bicker.gif[/img]
[addsig]