|
Air-cleaner base modification
You can modify your air cleaner base for more under-hood clearance (perhaps 7/16"), even if it has a drop base. I cut the inner ring that rests on top of the carb horn, this lets the base sit flat.
Then I needed to make room for the fuel adjusting nuts. I added (I brazed mine, but Silver Solder or JBweld might work) pieces of 1" conduit and then capped them. The all important carb base to top distance remains the same.
That's all there is to it!
______________________________________
Dennis
65' STANG (3330 lbs), 393W, Toploader 4 Spd, 4:11, AFR 205's, Vic Jr. Intake, CI SR Cam, 950dp, 10.6 CR
11.21@124.0 al naturale
My Racing Videos
Last edited by dennis111 : 07-15-2007 at 04:22 AM.
|
