I've got them, after some tweekage, they fit fine. I believe I got ones for power steering which I don't have. They are decent for the price, if they come too close to some stuff, heat till red hot and roll or bang to shape it. I did all that in 3 places and then got them ceramic coated (that was not cheap). They look badass under that thing. There is a sequence to putting them on which will make sense while you do it. Once they are on the engine kinda loose, put the collector on the way it fits best. It's a tight fit but it will go on. Put 2 bolts through the tabs on the collector and tighten up on the engine. You may find tightening on the engine first might work better and still give some movement.