|
Re: Intake Gasket
Quote:
Originally Posted by MusclePoney
Good ideas guys, thanks!
Do you think I should use RTV around the intank ports on the heads? or only on the coolent ports?
|
No...Only on the coolant ports....Another neat trick is to use a couple of studs to hold the gaskets in place and guide the intake exactly where it needs to go so you don't disturb the gaskets...After you set the intake in place and thread the rest of the bolts in you can remove the studs if you like and replace them with bolts....Some 302s I've worked on have had the 4 studs in the center right from the factory....You can also use gaskacinch to glue the gaskets in place if you don't like the stud idea.. EDELBROCK 9300 GASGACINCH GASKET SEALER - SPECIAL PRICE!
______________________________________
1968 mustang..408 windsor.Vic jr heads and intake.Pro Systems 950HP holley, 1 3/4 hooker super comps,Custom CI solid roller camshaft,Probe shaft rockers, 4 speed with 4:11 detroit locker.
|
