|
Re: Die Grinder Cutters/Bits ??
Quote:
Originally Posted by PaulS1950
You don't want longer bits - it will cause problems with the bearings in your grinder. You need a shaft type grinder. The handle on the shaft is about 3/4" diameter and it allows you to go deeper into the port.
Longer shafts will just spin out of balance and break.
|
That makes a lot of sense there Paul. I found a pencil style grinder that will take my 1/8 bits. I'll give that a try.
Last edited by tdf_46 : 12-12-2007 at 07:30 PM.
|
