Yes, I have it pre loaded with the front hoops on the bars, equal load where there snubbers are about a 1/8 inch from contacting the springs.

Its a spool so the power is equal to both tires, and looking at the contact patch and resulting rubber on the drive way, appears to be equal load each wheel.

I dont have the slicks on it right now, using street radials until I get this figured out. Wonder if it could be a weak spring. The prev owner, who ran it on the track, had a wedge under the pass side, I took it out to level the car. I also had a bit of twist or something when I would shift hard or dump the clutch, taking the wedge out took a lot of that out. but it still is making a visible shift to left, just dont feel it as much as I used to.

______________________________________
Gydyup - 67 Mustang Coupe
351 Hyd Roller/Perf RPM Heads/Victor Jr Intake/Holly 750/Dan Williams WR Toploader/9 Inch 4:56 spool, Mark Williams Axles
\"old School\"