|
Re: PRO COMP ALUMINUM HEADS
Quote:
Originally Posted by kgordonl
Hey Dennis, did you ever post a comparison anywhere about how your car runs now with the AFR 205's vs. when you were running the ProComp 210's??? I would love to hear your observations.
|
No, I haven't ran the car yet since the tracks here in the snowy north haven't opened for the season. I am shooting for a mid-April test and tune.
Should be a reasonably valid comparison. I bored the block .030, but used the same model of piston. Otherwise the motor will be the same except for the AFR's. The AFR's were freshened up and a light milling was required to eliminate some deck surface scratches.
Other performance changes to the car over the winter include Calvert 90/10 front shocks and a sintered iron adjustable clutch.
If I remember this thread, I'll report back here with the results.
______________________________________
Dennis
.
65' STANG (3330 lbs), 393W NA, Toploader 4 Spd, 4:11 TrueTrac, AFR 205's, Vic Jr. Intake, CI Custom SFT, 750dp, 11.0 CR
11.52@121.29mph
Last edited by dennis111 : 03-22-2008 at 10:27 AM.
|
