|
Re: Lost a Motor last night.
Quote:
Originally Posted by MCCUTCHEON4
Hi Pete,
We were running 1.6 rockers.
I just got in from pulling the motor out.
I pulled the heads and found that every
exhaust valve was bent. And #2 hole has been destroyed. I will wait to talk to Dave before pulling the bottom apart.
I just hope the crank survived.
Gregg
|
Greg,
If you've bent all the exhaust then check the p/v clearance. 100 thousands is the minumin you can run. I'd have them check that clearance, if the cam slipped or your floated the valves a few intakes would have ended up bent. You may need to flycut the pistons. Do you have a witness marks on the piston tops other then a hole?
I'd drop of the heads and block to the builder and start working a deal.
Good luck.
Jeff
______________________________________
J Jackson
JN Motorsports
www.OldGuysGoingFast.com
TAD, S/C, S/G and S/S
|
