Quote:
Originally Posted by Timberwolf
I thought I read somewhere that the aluminum AN fittings cannot withstand the heat/pressure of trans fluid, and this was a common mistake. Also, the braided lines are only rated to 300 degrees F, and trans fluid can get to 350, 400 or more.
|
Well my racer friend (whom sold me the equipment) has the same trans cooler and same lines on his 10 second mustang. If it was a problem I dont think he would have sold me the parts. I am not familiar with transmission cooling lines, but I had crappy rubber hose with loose clamps and never had a problem with them blowing off. the hose is also rated at 1000psi.
