Tech Archives Project Cars Readers Cars Forums FordMuscle Store Feature Cars
pix
pix
Membership
pix
FORDMUSCLE.com FordMuscle Nav
View Single Post
06-12-2009, 01:28 PM   #11 (permalink)
gentz
 
Join Date: May 2009
Posts: 360
Re: Cruise o matic adjustments

well been working t this most week.. Maybe its due to the short times i work on it i may be missing something.. Ok my car has the 3 speed cruise o matic, the shifter has at the very far righ a L then green dot, then just a dot. I notice that in the green dot it starts in 1st and in the white dot it seems to start in 2nd. i tried to drive it in the green dot and it takes a while to shift to 2nd. I did check the modulator and it does have a little screw for adjustment where the vacuum hose goes but where should it be? the screw is almost all the way out. well i will play with this a little more today or i may just throw in a new modulator to see if indeed it is defective, it doesnt leak any tranny fluid to the vacuum hose but it may still be bad. I will also pull out the governor later today , just that it seems as if i have to remove the cross member for the tranny to get to the cover.
______________________________________
If it aint Broke lets modify it!

1962 Ford Galaxie 500, cruise o matic, 292.
gentz is offline   Reply With Quote
 
pixblue
Probe Industries