Our '63 has a "bendix" starter (long neck going into the bell housing).
I remember someone saying that the shop manual calls for the header to be
removed to get this starter out. Just wanted to know if there were bolt
removal paterns and what not.


Linkage is not in the way, just the header and what looks like a cross member.

Engine build is probably less than 2 years old. Very clean but has a habit of
seeping fuel out of the carbs onto the intake if it sits a long time.

I will hit the bolts on Thursday with some WD40 and attempt the change out Friday. I might even take some pics! Even if I screw up, the engine swap is
going to happen anyway sooner or later.

______________________________________
63 G code BoxTop 4spd
63 Z code Convertible
63 X code Convertible
63 1/2 Z code 5 spd
70 Dodge Super Bee
Cammer looking for a body