Any C6 Tips?.......

I am wanting to get the most out on my C6 transmission and was wondering if anyone has any experience with the B&M Shift Improver Kit?

Alledgedly it is 3 kits in one.

Stage 1: RV/Heavy Duty use
Stage 2: Street/Strip use

When I drove the donor car before disassembly, the transmission seemed to shift ok, though not really distinctive.

Thanks guys!

[img]/phpBB/images/smiles/icon_cool.gif[/img]
[addsig]

J.R,i'd go with the H.D if you're doing mainly street driving,will crisp the shifts nicely.I have some c6 info i could email if you like...

Thanks Greg, that would be fantastic!

My knowledge is rather limited to say the least when it comes to the C6.

Thanks again!

[img]/phpBB/images/smiles/icon_cool.gif[/img]
[addsig]

I run the cheetta valvebody and I am very happy with it.Good firm shifts,not neck snappers but solid and fast.

Greg,

It it isn't too much trouble, please send me a copy of the C6 info as well.
psmalley@fordpinto.com

Thanks,
Paul

I would recommend the Transgo 67-2 kit over the B+m shift improver kit. If you want to use Bm go with the Transpak and set it to street/strip mode. An R servo is also a nice way to help clean up the 2-3 flare. Always use a new main pressure regulator. The Transpak includes one for the early model C6s. If you dont use a Transpak you can use the Sonnax valve. This is the valve I use in my transmissions.

Jay www.broaderperformance.com

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2002-09-23 17:08, jay427sohc wrote:
I would recommend the Transgo 67-2 kit over the B+m shift improver kit. If you want to use Bm go with the Transpak and set it to street/strip mode. An R servo is also a nice way to help clean up the 2-3 flare. Always use a new main pressure regulator. The Transpak includes one for the early model C6s. If you dont use a Transpak you can use the Sonnax valve. This is the valve I use in my transmissions.

Jay http://www.broaderperformance.com
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

Is the Transgo Reprogramming Kit in the blue box the one you are talking about or does it say 67-2 on the box?

Thanks again.

[img]/phpBB/images/smiles/icon_cool.gif[/img]


[addsig]

My C6 tip is get a C4. I had a B&amp;M transpak installed in mine and it didnt make that much of a difference. If its a street strip car a C4 is the only way to go. If you dont switch now,you will later.
Brian
[addsig]