351W flywheels

I was curious if there are any 351W flywheels that accept late model (5.0) 10.5" Mustang type clutches, or are they all 11"?

Reason I ask is that I want a 28 oz imbalance flywheel that accepts the Ford Racing "King Cobra" clutch (originally designed for the mighty 1977 Mustang II King Cobra perhaps [img]/phpBB/images/smiles/icon_wink.gif[/img] ?) that I have.

I think Ford Racing offers billet 28 oz flywheels that would fit the bill, but I wondered if there was a (cheaper) regular production version.

Thanks,

Arjan

<font size=-1>[ This Message was edited by: Helmantel on 7/27/05 10:22pm ]</font>

Because all factory 351w's had 28oz imbalance, you can use a 289 or 302 sized flywheel as long as it is 28oz imbalance.

You would also need to use the smaller bellhousing to get the starter to match up (unless you are using an aftermarket one which has both starter patterns.)
[addsig]

I picked up a ram unit off ebay from a fellwo who never got around to his T5 swap... SFI certified for &lt;$100!

and yes... its going on my 351w/393
[addsig]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2005-07-27 11:05, dennis111 wrote:
Because all factory 351w's had 28oz imbalance, you can use a 289 or 302 sized flywheel as long as it is 28oz imbalance.

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

I'm aware of that, but what I'm looking for is a 28 oz imbalance flywheel on which you can bolt a late model 10.5" Mustang clutch.

BTW; You have a nice Mustang!

<font size=-1>[ This Message was edited by: Helmantel on 7/28/05 5:54am ]</font>