351C STROKER ASSY.

**BLUE351RACING** · 01-25-2006, 07:30 PM

I AM LOOKING INFO. ON PUTTING TOGETHER A 351C STROKER IN THE 370 TO 390 INCH RANGE. HAS ANYONE DONE ONE, WHAT SPECS, AND WHO IS MAKING PARTS? THANKS.

**clevelandstyle** · 01-25-2006, 08:14 PM

Mine is a little bigger than you want. It's a 408C and has Scat forged crank, Scat 6" H beams and custom Ross pistons speced by Mark McKeown. http://www.mmeracing.com/
Mark can set you up with any kit you'd like.

I'm very happy with it. Nice stuff.
[addsig]

**BLUE351RACING** · 01-25-2006, 08:22 PM

thanks for info. i have heard good things about scat products. Great numbers with the fairmont . thanks again.

**ckelly** · 01-25-2006, 10:34 PM

Do some research over on http://www.351Cleveland.net
[addsig]

**tonys10sec306** · 01-26-2006, 05:38 AM

http://www.coasthigh.com/Assemblies/Ford/ford_393c.htm
[addsig]

**kacprowicz** · 01-26-2006, 10:24 AM

Had a bit of a hard time finding cranks in stock for my 393C last month; ended up buying from Probe - www.probeindustries.com - apparently they are a little hard to come by ATM.

**BLUE351RACING** · 01-26-2006, 08:03 PM

thanks all above for the great information. great forum and help. will write back on which rotating assy. I got. thanks again.



All content © FordMuscle, LLC. \| Ford® is a registered trademark of the Ford Motor Company. \| FordMuscle.com is not affiliated with the Ford Motor Company.