Head porting

Hi
I'm looking for someone who can port my trickflow heads and my Victor intake together and flow test it to be perfekt.
It is for my 460.
Who can I trust?
[addsig]

flow testing should be for nothing more than the individual to compare and see if they are mkaing gains, dont ever race someone else flowbench cause its meaningless. Theres a few people that know the big blocks well. What kind of pricing do you have in mind in your budget?
[addsig]

Well, I know that John at strokerengine.com wants 1000$ for a cnc portjob of the heads and I'm tempted of that, he claims a 50 - 75 HP gain. so I say in the 1000-1200$ range.
Hhat do you mean by : dont ever race someone else flowbench cause its meaningless.... I'm from Denmark and my englihs is not too good.[img]/forums/images/smiles/icon_smile.gif[/img]
[addsig]

Check out

http://460ford.com

Plenty of knowledgable 460 guys there.

In case that gets filtered...

h t t p : / / 4 6 0 f o r d . c o m

Good Luck!
[addsig]

I think what woody1 is trying to say is, dont always pay attention to who has the best flownumbers cause every flowbench is different

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2006-09-19 12:20, strtcar wrote:
I think what woody1 is trying to say is, dont always pay attention to who has the best flownumbers cause every flowbench is different
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>right, alot of guys will use different bore size, different pipes, etc.. when testing so if X head flows 300 on the intake at shop A and the same head flow 320 at shop B thats not really a fair comparison by any means
[addsig]

Hmmm, I never even thought about that. Good advice!
[addsig]

Have a set of Trick Flow A460 heads got ported at Total Engine Airfow 330-784-4382 they flow 466.3 on int. and 361.1@.800 they did realy nice job!! didnt need intake ported just port match. building a 598 .

I've had good results from Steve Schmidt Competition Engines. www.steveschmidtracing.com Just had some work done on a set of small block heads and I am very, very pleased with the work they did. Its not a huge shop so you still get attention. The fact they build nhra pro stock engines speaks for itself.

I port my own.... You can too! [img]/forums/images/smiles/icon_smile.gif[/img]
[addsig]