help Need front end parts for 61 comet.

HI all
I was checking of parts to fix my Comets front end and Christ they want $646.oo for 2 pair of upper A-arm bushing and only $35.oo for the 2 pair of lower bushing.
Can someone get me a better price.. Here's a list of what I need and there price I was Quoted By Comerical Tire Co.
1 Rt outer Tie Rod (bent).$76.oo
1 RT. outer Sleeve........$89.oo
<font color="red">2 upper A-arm Bushing ...$646.oo holy crap</font>
2 lower A-arm bushing.....$35.oo

Any help well be appreacated
tim
[addsig]

Try Kanter. That is where I bought my front end kit. Get their deluxe kit.

http://www.kanter.com/p58-fkd.html#Mercury

<font size=-1>[ This Message was edited by: truedog on 10/4/06 6:24am ]</font>

Somebody is trying to rip you off big time. Try theseguys:

http://www.espo.com/
[addsig]

DANG! Don't ever go back there! Both of those are good places. Also look at:

http://www.p-s-t.com
http://www.dearbornclassics.com

It depends on your upper bushing, but you can use 64-66 mustang complete upper and lower arms on your comet. THey bolt right in. I did it to my 62 comet wagon.

Thanks MC
I have heard that and going to check in on it..
tim
[addsig]

Try partsamerica.com The upper busings are around $10 each. I'm not sure if the attached link will work.

http://www.partsamerica.com/PartType...p;desc=Chassis
[addsig]

<font size=-1>[ This Message was edited by: 64squire on 10/5/06 10:57am ]</font>

<font size=-1>[ This Message was edited by: 64squire on 10/5/06 10:57am ]</font>

What I meant was the upper ball joints. I think 61 was the cross-over year for the standard or rare smaller upper ball joints the early 60 and 61 falcons/comets had.

I replaced my upper and lower control arms, centerlink, idler arm, pitman arm and inner/outer tie rods with 65 manual steering parts. Everything bolts in. Disc brakes are 69 mustang with 69 mustang outer tie rods.

If you have the $$ I would do the whole steering and suspension at once. Mustang stuff is cheap and everywhere and costs less than half of what it would cost to buy comet/falcon parts.

Thanks 64Squire
Thats a great site for the parts...
Tim
[addsig]