Supercharger clearing Problems

I'm installing a powerdyne supercharger on my 88 stang and I'm having problems clearing the hood. The kit is for a 86 to 90 passenger side unit. According to the manual this kit was design to fit under the stock hood!
I only need to lower the engine about a inch.
Anybody knows of motor mounts that can do this? Thanks J

Have you checked with the Powerdyne folks to see if there is information on mounts or mods to the mounts? That would be a good first step. Give their customer service department a chance to help.

I did check with powerdyne and they just tall me the same thing as the manual; The kit is design to fit under the stock hood.

My car originally was a 4 cyl; So! I don't know if that has anything to do with it.

What motor mounts are you using?

Also what are you using for an engine? What year? What's it out of?

I have a 302 from a 85 Mustang GT.
I'm using Prothane Motor Mounts.

Do you possibly have the motor mounts on the wrong sides?

I've installed several of these and never had any hood fitment probs. Even put a couple on some 5.0 Explorers with no issues either.




BTW what kit do you have? PN#?