rpm air gap

Hello,I picked up a rpm air gap intake for my 302,and my question is what is the correct gaskets to use and do I need to put any sealer around each of the opening? Thanks

I'll reply. Just get a good set of Mr. Gasket Ultra seal, 302 gaskets, dont seal it...just put some silicon around the water ports and between the cork gasket and heads on the front and back, not around the intake ports and be good to go.

Same - but use a bead of RTV on the ends, not the end seals from the box. I would use Hylomar around the water ports.

Just to make sure,would I put sealer on both sides of the gaskets?

Originally Posted by jppatches

Just to make sure,would I put sealer on both sides of the gaskets?

Yup...Just around the water ports.

Originally Posted by 080522jk

丹青缘画廊本着弘扬中华文化艺术北京画廊与书画收藏爱好者进行广泛交流的宗旨北京画廊同广大书画艺术家建立广泛联系北京画廊为有杰出艺术造诣的中青年艺术家提供一个艺术窗口北京画廊不断推出新人新作。主要为广大书画收藏爱好者提供近现代著名画家真迹、精品，以及有较高艺术水准和增值潜力 的当代中青年书画家作品北京画廊本站作品均来自于画家本人，本站向所有收藏者郑重承诺：本站所售作品，一律保真

No kidding??? LOL