|
Re: Light switch?
i don't have a diagram, but since that's only a two position switch you can put power to it and then pull the switch to the first position for park lights, and then with a test light see which terminals are hot. Same thing with the headlight position.
Once those are determined use the same procedure for the dash lights. Turn the rheostat on the switch and you'll see the test light dim and get brighter when you are on the dash / dome light circuit.
Make sense?
______________________________________
Murff
Peace, Love, and Groovy Vibes
Last edited by Murff : 07-05-2008 at 11:17 PM.
|