I'm having some difficulty finding a replacement gasket for my master cylinder (dual reservoir). It's on my race car, but I think the master cylinder came from a late 70s mustang II----at least that's what the previous owner said. I do have a part number on the gasket but local auto parts stores can't seem to cross-reference the part. It's very frustrating. With a new gasket, maybe I can avoid another round of brake bleeding.
Here's what was stamped on the gasket :
AB1
BENDIX
2225441
53
Any help would be greatly appreciated.
______________________________________
'92 Probe
Keith Craft BBF 572"
1.28 60 ft.
5.79 @ 121 in the 1/8 mile
If it is in fact a MUST II, the FORD PN is (or was) D1FZ 2167-A R/B D1FZ 2167-B.
That may help.
Thanks. I went to a Ford dealer....all obsolete parts.
However, I went to a local auto parts store and I finally found one that fit. It's in the 'HELP' brand parts. The other stores I went to didn't have that particular one.
It seems to be working okay.
______________________________________
'92 Probe
Keith Craft BBF 572"
1.28 60 ft.
5.79 @ 121 in the 1/8 mile
I'd be interested to see that Probe housing that big block. I was looking to stuff a small block in one for the street.
______________________________________
"Tell it like it is or don't tell it at all" 1964 Falcon 2dr HT, 347V8 4V, dual exhaust, 5sp, pwr assist R&P steering, AM radio, heater with defrost and 2sp fan, electric windshield wipers, cigar lighter, dlx light group, bucket seats, console and full carpet.
With a new gasket, maybe I can avoid another round of brake bleeding. 
Today
