- thoughts about 540 BBF build up
- Strokers - Archived Posts from old techboard
- Archived--- search for 514 Stroker BBF parts
- Archived---- Best Stroker motors...
- Archived- how to build 460 stroker with stock parts
- 347 OR 331
- 351w crank into 302w block
- 347 valve settings
- 393 stroker
- 383 or 393
- Why?????
- whats a good stroker motor for the bucks
- 289 to 347?
- 351 Stroker
- More 351 Stroker Questions
- Bigger 460
- Quality Stroker kits
- 393 Stroker
- Need some opinions
- Lessons learned from custom 331 stroker using 289 rods...updated
- Couple more stroker questions
- Screwy Clearances
- 806 cube BBF
- 390FE with 428 crank?
- 351M / 400 Crank Swap
- Blown Stroker
- new 4.5 in scat stroker crank
- PAW 427W Kit
- 393 Piston Question
- Head Recommendation
- 351W/AOD
- Hows my combo?
- 393 or 408
- Stroker Rod Ratio and Piston Selection
- Stroker Badges
- 331/347 rehash
- 351c blues
- clevors
- What manifold for raised deck block?
- 408 - 418 - 427 Shortblock
- 352 FE
- 393 Edelbrock build
- more 393 piston questions.
- T-5 BUILD UP
- new engine
- 427 Stroker
- 393 stroker
- 331\\347?????
- anyone running a gear drive? mine wont clear front cover
- 351C Motorsport A3 Aluminum Heads
- Crank hitting oil pump!!!!
- Strokers in a circle track race car
- A 393 question that was already answered somewhere at another time...
- 289 Stroker?
- hello i purchased my first mustang
- How to home-stroke a 302?
- Stroking a 302
- What to look for...
- streetable 393 combos?
- lets build a 302 stroker sleeper
- 331/347
- bad 60ft time at track
- gt40 motors are they worth it
- hv pump
- stroker timing
- 393 rods/stroke
- check out this 408 stroker: 750+ HP
- 460 fuel injected stroker
- How much to build a 408W or 427W stroker?
- 5,4 Rod, what good?
- 347 Stroker kit
- 408C Stroker and stuffer plates
- WILL THE TWISTED WEDGE HEADS WORK WITH STOCK PISTONS
- 393 stroker on a budget
- Stroking a \'79 460
- building a 66\' 289
- Stuck on a carby
- 351W to 400
- iron head sbf stroker??
- iron head sbf stroker??
- How much HP + Trqe for my 393? 1/4Mi times??
- Probe cranks any good
- stroker for 94\' roller 351
- 408 build up
- vacuum advance
- advice for my 347 stroker. educated posts only
- horse power/torque?
- looking for engine builder
- 408w bogging
- 289>347 questions
- 393 STROKER BUILD UP CHEAP
- 9.8-10 393w stroker piston wanted
- 393 in F150
- 414 build
- Help with a 332
- which cam for my 393
- pist \"N\" broke
- 393 stroker
- 393 efi
- Stroker question
- Could you stroke a .60 over 351 w
- strokin stroker
- 393 Buildup
- Stroked Cleveland
- Looking for good roller block 351W in Idaho
- looking for a 302
- Dart blocks
- HO Camshaft with a 331 Stroker
- KB322 Pistons??
- stroking a cleveland
- Tires and Wheels
- Dyno Day Tuesday
- Clearance for a 347 crank and rods.......
- what size headers on a 545 stroker
- March 11 dyno day
- Cracked cylinder
- How about this quench high
- 351w Stroker now 408 Opinions welcomed.
- Stroking a 302 Cleavor
- 393 and stock EFI or close
- 347 combo
- Good deal...maybe...3.75 eagle...opinions please
- 331 build
- 393 stroker combo
- 82' 302 HO or 351 ??????
- Blown 351W Stroker Anyone?
- 347 ADVICE
- stroker ? for tow rig
- High on Carbs (Supercharged 331 stroker)
- 347 Stroker muffler choice
- Another 408 question
- Stroker kit for 390
- 393 pistons
- my car
- my car 2/10th faster
- Will the stroker kits fit a 289
- 2 bolt main 302 block??
- 383C Durability ?
- preview of my 385 cube alcohol injected CHI headed roller motor
- 393W Comp Cams Spec\' - what are your thoughts?
- 408 stroked 351W ????
- 427W
- E-303 cam in a 392 stroker
- anyone change their 289 Galaxie into a 347?
- 351W Blocks
- stroked 460
- What Carb?
- Cleveland Stroker
- 393 build questions
- Survey
- Plug selection for 347 stroker
- 351c to 426 stroker
- Pistons, what can I use these for?
- 393 Stroker Builds
- Stroker in my 66
- Another 408w in the works.
- is this stuff any good
- 393 stroker question
- Cleveland stroker options?
- what year 351w.
- what cam?
- Heads for my 393
- UPDATE !!! Piston to valve clearance 408w
- FORD MOTOR NEED HELP
- The bigger the better?
- Main girdle with stock oil dipstick
- from 347 to 408
- 347 STROKER RECIPE FOR AN AMATURE
- Please help with my stroker build
- 438 stroker
- liftervalley girdles
- Street Cam for 331
- 408 STROKER
- Are there any tunnel rams available for the 351 Windsor ?
- 351W Long rod
- 514 Cooling
- 392 or 408 ?
- 4.2 stroker
- 427 stroker
- First Dyno Results
- Headers for 289,351W,347 stroker.
- TMD forged stroker kit
- 393 or 408, and it\'s gotta be tough?
- help me build a motor...
- stroker six
- headbolt question
- is this a good combo
- Steve Peterson performance fords for Cleveland Strokers
- Comp Cams 35-426-8
- Stroker Cam selection
- stroker
- comp cams, street roller
- 331 Stroker
- 376 inch clevland
- 9.480 block. Anything I should be careful of?
- 347 and 500hp
- 418 hp & torque
- 408 re-cap
- cryogenic 408...
- WHY!!WHY!!WHY!!
- heads for 393
- 331 Stroker Specifications
- 347
- carb..
- cam specs
- Cleveland Stroker
- 408 stroker setup
- 331 clearance..
- compression help
- how much is too much??
- 351W Help
- 414 stroked heads upgrade
- 331 Stroker cam
- EMISSION LEAGAL
- carb choice
- HOW MUCH POWER DO YOU GUYS THINK I WILL HAVE
- Problems with 427 strokers??
- how much HP will it make?? just guess.....
- what cam for a street 393/408
- Scat 331 vs. Eagle 331
- Lincoln Y-block
- 393 stroker
- AFR 185 VS. AFR 205
- MY 408 build is under way.
- Edelbrock Victor Jr. for 331
- Mock-Up
- taurus sho
- Headers for my 66 Mustang which to buy???
- 392 pistons
- 393 pistons
- 393 rods
- 393 Stroker Balancing
- What size carb ?
- block clearencing 393
- headers vs. rpms
- HEADERS
- HOOKING UP
- STROKERS
- RODS
- 393 stroker
- Block filler
- Would a Vic Jr. help my combo?
- which Throttle body dia. for my stroker engine?
- What cam for a 347
- 445
- My Header solution
- E9AE windsor block - good for 500+ stroker?
- 383 stroker...........9.5:compression can it be done?
- Anyone stroke an FE?
- Help on cam, manifold and carb