408w build ??

408w....94 FT4E roller block 4.030 with main girdle and balanced

4.00 Eagle cast steel crank

Eagle H-beam Forged steel rods

Srp pistons with -28 dish this gives about 10-1 compression

Comp cams 256/264@ .050 with 621/621 lift solid roller cam installed on a 106 cl.

Edel. victor jr 210cc/ heads/ported and polished/ milled down to 58cc
titanium retainers with 10 degree super locks

Victor Jr intake ported with pro-systems 840cfm carb and 1 inch spacer

csr electric water pump

Kooks 1 3/4 jet-hot coated with 3inch collector

What kind of power can i expect?? What E/T will a 3400lb car run with this engine??

C-4 with a full-manual and a 4200 converter and a 4.30 gear/28.5 /10.5 tire

The header pipes are too small. At lest 1 7/8 preferably stepped to 2 inch.

It should be good for about 550hp I would guess...As for the ETs there are lots of online calculators that should give you a rough idea using the hp and wieght of the car.