ford parts

i have a few parts laying around that i was saving but dont think i'll be using anytime soon, so instead i'll list them here and at least someone may use the stuff, so here goes i have 3 460 blocks all standard bore, the first is a D1 block thats been hot tanked and had new freeze plugs cam bearings and oil galley plugs installed, take 150 for it, it is standard checked out ok at machine shop, second is a C9 block standard bore needs to go .030 or .040 to clean up, take 100 for it the third is a D9 block standard bore needs tanked and that sort of work, should stay standard or clen up at .030 for sure,
also have a shortblock 351w stock stroke standard bore, new rings bearings and block has been deburred, its a D4 casting with 0 miles, take 200 for it, next is a 351m-400 intake antique edelbrock sp2p 400 needs a good cleanning but ran decent on an ole 4 wheels drive i had, take 45 bucks for it, have 2 good 460 core cranks, will clean up with minimal turning 25 each, they are both 2y castings, a 429 rotating assy standard on all with factory flat tops, came out of the c9 block listed above, 45 for it, a set of 65-79 2wd truck motor mounts including all 3 pieces for both sides, take 85 for those, misc big block parts including front sump oil pan and pickup front covers flywheels let me know what you need and i'll see if i have it, i also have a set of bare c9ve heads that i've started porting, i will finish if someone wanted them, stock valves iin those, finished ported 300 bucks, as is 100, all parts are located in conway arkansas and all prices are plus shipping,

dude i live in bryant arkansas. i spun a rod bearing in my 302 a few weeks ago and am in the process of figuring out what i should do. got any spare 302 crank and rods?