Headers for 351W

My 351 W is on eng stand and almost ready to put in. I've done the crites tower mod and have a 302 in it how with a very small set of headers. Crites is suppose to have a set for 351W--has any one tried them or know of some other source.
Thanks for any help.[img]/phpBB/images/smiles/icon_confused.gif[/img]

In either the last issue or the one before that of the "Fairlaner" magazine (FCA)I want to say that Hooker or somebody like that is now making a headder for a 351W in an early Fairlane. I will try to remember to look up and post back.

Thanks. I contacted Criets and they have them-1 3/4" that should fit. Need to measure bolt holes on head and call them back today. Would like to have some 2" ones but doubt I have the room even with tower mod.

I also need 2 inch....or even 1 7/8 for a 63 if anybody runs across them. I think the crites are made like the big block headers with the front tubes coming down in front of the cross memeber.But I dont know that for a fact.

<font size=-1>[ This Message was edited by: highpockets on 1/12/03 3:27am ]</font>

Just received the crites headers and I don't like them at all--# 1 &amp; 5 tubes go under the A frame--anyone know of a different source that will work with the shock tower mod?
Thanks
BTW_ Crites did say if not what I wanted just send back!
[addsig]

Well I tried the Accel header plugs (shorties) and I still see no way they will work-you cannot even get a socket on # 4 cyl due to # 3 exh tube-Help