28-Spline Slip Yoke Wanted For 289 V8 W/C-4

Hi Everyone,

Before I install the 289 V-8 and C-4 into my 1963 Ford Fairlane, I need to switch the 26-spline slip yoke (car was originally a six-cylinder) to a 28-spline slip yoke. If anyone has a 28-spline slip yoke they're willing to part with, please let me know.

Thanks,
Tom - Glass_Packs@yahoo.ca

When I put the C4 in my '63, I went through the yards counting the slots in the front yoke and measuring the O.D. These were shafts that were in tubes so I had no idea what they came from; Ford, Chevy, etc. I decided to go to a U-Pull-It and find a Ford. I found one in a '69 Falcon. I used that one because it was the only car that had a shaft that I could get to. But I think all C4 yokes are the same. I took the new yoke and my drivesahft to the local machine shop and they installed it. The new yoke fit the stock driveshaft and the stock three speed 260 driveshaft fit the 260 with the C4. I don't know if it makes a differenc, but the C4 came out of a '65 Mustang.

Later!
Mr. Ed [img]/phpBB/images/smiles/icon_smile.gif[/img]
[addsig]