started trimming the towers

managed to do one today between storms [img]/phpBB/images/smiles/icon_wink.gif[/img] Got the drivers side cut, just need to clean it up, do the template and weld up the plate then do the passenger side. Its supposed to be kinda nice tomorrow so hopefully can finish the drivers side and start on the passenger side.
Its going to give me lots of room there, so cool.

[img]http://groups.msn.com/_Secure/0RwDjAjoVfPHq3BYr0IYtRx48MVM2l8e7UQZTY1VMTIls4pt1i kP4EXC*iRyN*jY3NRITWYla*pqQ1fZ8j88ScoNQ8PxeoLLUosP wTnwTWKc/006.jpg[/img]

[img]http://groups.msn.com/_Secure/0RgDOAgkVxeOxXA7wB!zhnCMa3!5elaui59fnTnpLGndvmsVa1 X5jKqXKJBiPx7pfgQ7X9TqZOmj8BiXLS4pLJ*vbcNbeOXLNFfs ht0rX3HA/05.jpg[/img]

Rick
[addsig]

[img]/phpBB/images/smiles/icon_tup.gif[/img] Nice work! If you have a big scan of those pics, I'd appreciate a copy via email. I keep eyeballin' that 400 block in the corner...
[addsig]

I can take more tomorrow for you and email you some. My camera takes 2048x1536,1600x1200,1280x960 and 640x480. What size you want [img]/phpBB/images/smiles/icon_smile.gif[/img]

Someone did an album on my site if his mod if you like to see his


http://groups.msn.com/MyFordandMercu...towersetc.msnw


RIck
[addsig]

Rick, we made the same cut as you and then wrapped it so it appears that perhaps they were made that way.

I cleaned it up and used some icing to make it much smoother than this pic shows.

Just an idea you may want to entertain my friend.



[img]/phpBB/images/smiles/icon_cool.gif[/img]

_________________
69 Red Falcon
1972 Harley

<font size=-1>[ This Message was edited by: Johnny Ray on 3/5/04 10:11am ]</font>

Lookin' good Rick, keep us updated. Even my small block could use some more room, hate those shock towers.
[addsig]

You guys are gutsier than I am. I just beat the crap out of mine. Rules say all stock [img]/phpBB/images/smiles/icon_frown.gif[/img]
[addsig]

I could porbably go down one more inch (since I shelby dropped the UCA) but I may want to raise it back to stock one day, and I can go out just abit more (which I may), just have to check and see where the spring is after I clean the cut up. So far I think its a big improvement for room, almost 2inches on that side alone. Im going to use 1/8th inch plate to cover the hole and going to do a 90* bend in the plate instead of welding 2 pieces, it will be one piece and look nicer (I think anyways). I'll make the template tomorrow (weather permitting), tranfer it to the plate and mauk up the plate and take some pix if I get around to it.

Rick
[addsig]

Picture size - at least 1280 x 960, bigger if it's no hassle to you. I've got 15+ meg of email space available right now, so have at it. Thanks for taking the time! [img]/phpBB/images/smiles/icon_tup.gif[/img]

pictures sent.

Rick

Thank you very much. Good shots! [img]/phpBB/images/smiles/icon_bow.gif[/img]