\'67 Drum Spindles

Does anybody have a set of these laying around for a Mustang/Cougar? I have Granada brakes right now, and have decided to upgrade to the Wilwood setup. It is possible to use the Granda spindles, but holes need to be drilled and tapped, and it's basically a big pain in the a$$. I'm going to call the dismantler I sold my spindles to about three years ago tomorrow, but if he doesn't still have them, anybody here have a set they would be willing to part with? FYI, the Wilwood brake swap is straight bolt on with the drum spindles.
[addsig]

[img]/phpBB/images/smiles/icon_cool.gif[/img]you can also use the 65-66 V8 mustang spindle as it is the same as the 67 drum spindle.
[addsig]

The 67 spindle is different that the 65-66. I just installed these on my 60 Ranchero thinking they were the same. The tie rod hole is smaller than the Granada hole and I had to have it reamed out to fit my tie rod adapters.


Troy

That's correct. The 67-69 spindles had slightly larger holes than the 65-66. See the chart in the link:

http://www.chepsk8.stangnet.com/cgi-bin/i/RP3.jpg