air compressor help

Guys,

I have a Craftsman air compressor (33 gallon). How do I go about attaching an frl unit? Do you recommend getting a modular unit with altogether or separate. Any decent websites showing layouts?
[addsig]

What's a frl unit?

Rick

filter regulator lubricator
[addsig]

I'd leave off the lubricator unless you want oil in your lines. Not good when you're cleaning or painting.
[addsig]

what's a good setup for painting? I never use air tools, but I use the compressor for odd jobs. Like to do a bit of painting with it. I know I need a filter; what else is needed?

sean
[addsig]

you need a water separator if your painting.
[addsig]

if you are serious about painting you need a dry desicate air dryer and good hard lines with water traps .
[addsig]

DRAIN THE TANKS BOTTOM DRAIN PLUG DALEY. BEST TO INSTALL A SIMPLE TWIST ON/OFF BRASS VALUE WITH A HOSE ATTACHED TO EXIT WATER TO A SAFE PLACE. KEEP COMP. OUT OF A DUSTY OR YOUR PAINTING AREA. CHECK FILTER WEEKLY IF USING HEAVELY, AND USE REQUIRED OIL, WITH CHANGES. I USE A MADEUP SYSTEM THAT I CAN TAKE WITH ME TO OTHER COMP. FOR THE FILTERS AND WATER SEPT. ATTACH WITH YOUR QUICK DISCONNECT FITTINGS. BEST TO USE HVLP SPRAY GUNS WITH YOUR LIMITED AIR SUPPLY..........
[addsig]