Iron Powder

STAY AWAY FROM THE LOCAL FEDERAL BUILDINGS, in your neighborhood Tom

If you show up at the local truck rental place I'm calling Larry and Queenie to bug out of town

sad thing is i posted this on like 10 other forums and everyone says the same thing

We love you to pieces Tom, just not blown up in pieces

Non destructive inspection companies use it for weld inspections with electromagnets.

Originally Posted by FEandGoingBroke

The dust from the surfacing stone is not collected in my shop... It's so fine it blows to the floor and get's swept up.

your surfacer doesnt have a liquid cooling tank flowing liquid on the surface as its spinning? all the shops i have worked in have, the stuff just flows down a drain tube into a container under the machine and you have to scoop the stuff out into the garbage every month or so....its really really small stuff.

on the + side glad dbu found something to work

the only use i can think of .
is way back wwhen i raced roundy round.
i used it to coat the aluminum engine parts.
so the magnet would stick and pass tech.