\'86 Grand Marquis 5.0 injection questions

I was given a '86 5.0 upper, lower, everything down to the sensors and engine harness (minus fuel pump relay and inertia switch). I'm toying with the idea of a mild turbocharged 302 or 351w in my mustang, but I think it would be easier to tune/modify a MAF system. Is it possible to use some of the parts from the Marquis SD system to make this possible? I already planned on a new upper/lower manifold, injectors, new sensors and harness. I'm new to injection (always messed with carbs) and any and all advice would be very helpful!

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2004-03-12 22:34, mavman wrote:
I was given a '86 5.0 upper, lower, everything down to the sensors and engine harness (minus fuel pump relay and inertia switch). I'm toying with the idea of a mild turbocharged 302 or 351w in my mustang, but I think it would be easier to tune/modify a MAF system. Is it possible to use some of the parts from the Marquis SD system to make this possible? I already planned on a new upper/lower manifold, injectors, new sensors and harness. I'm new to injection (always messed with carbs) and any and all advice would be very helpful!
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>Once you change all that what else is there? Other than a few sensors that's all there is to it.

dammit. What was I thinking??

thanks for pointing that out! Got a turbo yesterday, now to collect mass-air parts.