efi for a 77 ford truck

does any one know what the best route is to go to swap my carb motor to a efi? I thought about going with the 460 out of a 94 or newer but not sure if that is the best way to go any help would be greatly appreciated.

I'm doing the same with my 79 F100. I'm building a 91 Mustang 5.0 for the swap because there's tons of info out there and since it's a 302 it's a direct bolt in compared to 4.6 or 5.4. Just buy a complete parts vehicle so you'll have everything you need.
Holley, Edelbrock and mass-flo all offer bolt on kits as well.

apparently its a pain in the ass i wanted to do it in my 79 you gotta have a donor vehicle with everthing on it if ya dont it gets alot harder to do cause you gotta track down parts

Originally Posted by tonyc

does any one know what the best route is to go to swap my carb motor to a efi? I thought about going with the 460 out of a 94 or newer but not sure if that is the best way to go any help would be greatly appreciated.

IMO the best (and cheapest) way is to use a late 7.5L EFI. Finding a donor should not be that difficult. Look for an E-350/373 van.