Stock HO Cam Specs for Dyno2000

I was trying to get the full spec (card) on the HO roller cams from the 5.0l, so I can run them in Desktop dyno.

So far, I've found the lift to be .444/.444, 204/204 at .050" lift, 116 lsa.

I was looking specifically for intake and exhaust valve opening and closing timing events. Anyone know?

The cam I have now is a stock 86 HO roller.

Thanks!!

my info shows 210 @ .050 but thats not an 86' model, they were different I believe.

As per this site:

http://www.jason.fletcher.net/tech/s...ons/specs2.htm

IO/IC/lift:17°/69°/0.278
EO/EC/Lift: 67°/19°/0.278
Duration int/exh: 266°/266°
Valve Lift - Int./Exh. (1.6 rocker arm ratio): 0.444"/0.444"
Overlap: 36°

Thanks guys!!