Idle problem

Originally Posted by flocko

Thanks for pointing somthing out I should have already known. DDDDUUUUUHHHHH!!!

Anybody that has read the thread probably knows by now that this has been the"THREAD THAT ATE THE INTERNET" Thanks to all who have posted! I complained about not getting any help and then it CAME. In the spirit of the hobby, ALL have helped and for that I thank all of you! This is were I am at.#1 Check electrical cons to all sensors . #2 VACUME lines. #3 O2 sensors. After that "my friends" it is off to the Ford dealership. Yes, you heard me. That dreaded place of endless computers and 90 bucks an hour!!!!

P.S. A special thanks must go to FE, you were the first to respond and have hung with me threw the dribble and banter!! In the spirit of the hobby l THANK YOU!!! I wil be reporting back as to the outcome of my problem. This way I can HELP the next person. SEE, thats the SPIRIT!!

Bravo!

Do report in and tell what the Dealer Tards come up.
FE

so much for the Spirit!!!

I had a idle problem and was getting alot of different codes . I found my problem was those salt and pepper connectors . I remover the harness and soldered every wire together heat shrink tape completly removeing the salt and pepper conectors and it now runs great . It is a 90 gt 5.0 mass air in a 68 Fast back .Hope this helps you.
Jim