|
11-28-2007, 08:44 PM
|
#1 (permalink)
|
ford4v429
Join Date: Feb 2005
Posts: 717
|
A rusty 65 Galaxie 500 LTD
Dont know if this fits into this category or not, but heres a link to the 'online diary' I kept on the 65 LTD my neighbor gave me... Started Sept 2003, back together April of '04 turned into the rustiest mess Ive ever touched, took about 1000% more time and money than anticipated, but we got it back together again- had a lot of fun with the kids along the way. Got frustrated a couple times along the way, and fully admit being in over my head 100% of the time and made many mistakes along the way, but kept plugging away at it till it was back on the road.
Was not a 'restoration' by any means, just tried to preserve what we could, patch up the nasty stuff, hoping to keep the old thing around a few more decades... here's a link to the pages on it if youre bored- otherwise, I'll just put some pics below:
saving a 65 galaxie
______________________________________
Confidence: that feeling you have just before you realize the mess you've gotten yourself into...
http://www.hometown.aol.com/ford4v429/gal1.html
|
|
|
Today
|
|
|
|
|
|
|
|
|
11-29-2007, 06:52 AM
|
#2 (permalink)
|
v8shadow
Join Date: Oct 2005
Posts: 1,716
|
Re: story of a rusty 65 Galaxie 500 LTD
One summer night when I was still patrolling the streets, I parked myself next to a business with a good wireless signal and read the whole story. I really enjoyed it, kind of like a good book. If that isn't a restoration however, I don't know what is!
______________________________________
KEN
Factory 65 Galaxie 500 390/4v
|
|
|
|
11-29-2007, 08:33 PM
|
#3 (permalink)
|
ford4v429
Join Date: Feb 2005
Posts: 717
|
Re: A rusty 65 Galaxie 500 LTD
V8Shadow- thanks
I still wouldnt say restored as its a patchwork quilt underneath...inner wheelhouses are patched, front fenderwells patched, floor patched, trunk patched, frame new steel siderails/arches/torqueboxes spliced onto salvageable part of front clip and a rear crossmember...definitely can tell its not original, but structurally sound and all the rots been cut out- except for the doors...still look too good to justify putting the new ones on and having to repaint the whole thing...maybe after the old mustang gets done...
the most amazing thing about this car is my old neighbor Ben told me to keep the aluminum trim waxed- thats why it lasted so long- one of the trunk spears has gotten a bit of the 'whitish' tint that happens to old anodized aluminum, but the grille and all the rest look like new still(one little tiny gravel ding under the grille). He sure loved this old car- too bad he didnt like bigblock convertibles huh  It still blows my mind that the hood/doors are 40 year old enamel and smooth as glass, no dings/scratches...just 'bald spots' wher he rubbed thru the paint along the creases from all the washing/waxing he did on it over the years....with the color unless you get up close you really dont notice how thin the paint is, but it still shines mirror straight on the hood/doors...heres a few more pictures of some of the patching that had to be cobbled up:
man I hate rust...
______________________________________
Confidence: that feeling you have just before you realize the mess you've gotten yourself into...
http://www.hometown.aol.com/ford4v429/gal1.html
Last edited by ford4v429 : 11-29-2007 at 09:13 PM.
|
|
|
|
12-01-2007, 07:50 AM
|
#4 (permalink)
|
retyler
Join Date: Oct 2003
Posts: 1,534
|
Re: A rusty 65 Galaxie 500 LTD
Well, I too would call it a restoration, at least restored to a good looking road worthy classic. Nice job on that LTD.
______________________________________
"Tell it like it is or don't tell it at all" 1964 Falcon 2dr HT, 347V8 4V, dual exhaust, 5sp, pwr assist R&P steering, AM radio, heater with defrost and 2sp fan, electric windshield wipers, cigar lighter, dlx light group, bucket seats, console and full carpet.
|
|
|
|
12-01-2007, 04:16 PM
|
#5 (permalink)
|
weekendcarcare
Join Date: Nov 2007
Posts: 11
|
Re: A rusty 65 Galaxie 500 LTD
Great job on a really nice car. That is restoration for those of us that have to do it ourselves, and a good job, too. That's a lot of hours, but all put into a worthy project. Congratulations on a mission completed!
Charles
______________________________________
1972 Gran Torino Sport
2008 F350 4x4 Crew Cab Lariat 6.4 Twin Turbo Diesel
|
|
|
|
12-01-2007, 05:26 PM
|
#6 (permalink)
|
firstandlast
Join Date: Nov 2007
Posts: 53
|
Re: A rusty 65 Galaxie 500 LTD
Nice job on the car and even better job on the story. A lot could be learned from the relationship you had with your neighbor, it was about more than the car.
|
|
|
|
12-01-2007, 07:37 PM
|
#7 (permalink)
|
harnphanich
Join Date: Mar 2004
Posts: 16
|
Re: A rusty 65 Galaxie 500 LTD
Bravo!!
______________________________________
|
|
|
|
12-01-2007, 09:41 PM
|
#8 (permalink)
|
ford4v429
Join Date: Feb 2005
Posts: 717
|
Re: A rusty 65 Galaxie 500 LTD
Quote:
Originally Posted by firstandlast
Nice job on the car and even better job on the story. A lot could be learned from the relationship you had with your neighbor, it was about more than the car.
|
thanks- yeah, it was more than just a old 4 door Galaxie- it was somebody's pride and joy...and I gotta admit it's kinda grown on me a bit too. will never be a show car, but still looks pretty presentable and barring an accident should be around for a long time to come. I need to getthe front seat bottom reupholstered soon, it was ripped and is fast falling apart...
I had the coolest neighbors anyone could ever have- Jim and Ben lived on either side of us, they grew up together, their kids married and they had common grandkids- 2 doors up was my model airplane flying buddy Al. Al's wife found him a airplane at a yardsale for 15 bucks- we spent about 30 hours putting it together, and it turned out better than mine  we flew it twice, then he just continued to fly mine off the 'buddy box' because he was afraid of crashing his...I bet he put at least 300 hours on that old trainer of ours...we'd go out the kids and Al would take turns- he never did quite get to landing though, every time he'd get close to the ground he'd get twitchy and I'd have to pull up...
mine had a 4 cycle and would run 30+ minutes on a tank of fuel, and we wore that old thing out...
Jim died Sept '04, Ben Nov '04, then Al was diagnosed with A.L.S. mid November, went downhill incredibly fast- died Feb 1st of '05...I'd lived between them all for over 20 years and they were all more like parents than neighbors. I'd helped Ben fix the carb on the old gal back in the mid '80's- he kept trying to get me to buy it, but I didnt care too much for 4 doors 
We moved last year, I never woulda dreamed of moving, but we had outgrown our house(three kids, now a 4th son due end of january), and with almost all the neighbors gone, just wasnt the same anymore. Jim's wife is the only one left now- we still see her every month or so, and I drop in on Ben's brother Don every week or two- he's 84 now, and quite a character- like his brother, he loves to tease my kids and they get right back after him. Those old guys really went thru a lot- grew up in the depression, lived thru wwII, had a lot of neat cars (and they all enjoyed talking about the cars they had over the years). Ive had more fun talking with these old guys than they'll ever know, sadly there aint many left. anyone that gets a chance ought to try to get to know their old neighbors- sometimes a generation gap or two can be a very interesting thing, I know times we shared with these old guys and their wives was always rewarding...
______________________________________
Confidence: that feeling you have just before you realize the mess you've gotten yourself into...
http://www.hometown.aol.com/ford4v429/gal1.html
|
|
|
|
12-02-2007, 07:41 AM
|
#9 (permalink)
|
Mr.Ed
Join Date: Jan 2005
Posts: 801
|
Re: A rusty 65 Galaxie 500 LTD
What you did fits my definition of a restoration. There is nothing wrong with patching rust since replacing is either not the way to go due to lack of or quality of replacement parts. You did a fine job and your metalsmith abilities shine! Nice old Galaxie. I have looked at cars in just as bad shape but my metal working abilities are lacking.
Later!
Mr. Ed

______________________________________
1971 Torino 500 hardtop, 302, Cruise-O-Matic.
|
|
|
|
12-02-2007, 09:01 AM
|
#10 (permalink)
|
FEandGoingBroke
Join Date: Sep 2004
Posts: 11,911
|
Re: A rusty 65 Galaxie 500 LTD
Excellent telling of your time with your friends, you're a lucky guy!
______________________________________
Let us bow our heads and Murff
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:29 PM.
|
|