69 Mach 1 steering column

When the flywheel blew up on my Mach 1 it did quite a bit of damage. It's looking like I'm going to need to replace the steering column. I'm headed to the junkyard this weekend. What vehicles are acceptable donors?
[addsig]

I think your only option is to get one from a 69 Mustang. In 70, they ignition switch was integrated with the steering column.

I imagine a Want ad will make your search much easier. I wouldn't think it would cost too much.
[addsig]

If you havent found one, I know a guy that has one, If you want Ill give him a call and ask him what he wants for it.

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2005-07-10 09:14, oldstangs wrote:
If you havent found one, I know a guy that has one, If you want Ill give him a call and ask him what he wants for it.
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

I haven't found anything so far. If you wouldn't mind, I'd appreciate it if you could get some more info. (price/condition)

Thanks
[addsig]

He's looking...What part of yours got damaged?

Mine is messed up right where it comes through the firewall. Here's a pic.


_________________
Look at my page

<font size=-1>[ This Message was edited by: Cain on 7/12/05 7:53am ]</font>

That tiny bit of damage makes nearly the whole shebang worth Diddly! If you get a whole new one keep your old column, disassemble it and sell the collar's and what ever esle you gave left that you don't need on e-bay... I did this with a crap '68 mopar column I needed to replace and made enough money to buy a used column and enough extra for beer and supplies to rebuild it and paint it to boot! [img]/phpBB/images/smiles/icon_tup.gif[/img] [img]/phpBB/images/smiles/icon_tup.gif[/img] [img]/phpBB/images/smiles/icon_tup.gif[/img]
[addsig]

Cain, Hes got one and just got back from looking at it, Its in great shape and has got the wiring and trun signal cam in it. He wants $175.00 for it. I put an ididit tilt in mine it ran around 275.00 but it has a GM spline and GM wiring harness, I took pictures of what I did I could post. Let me know, If you want it Ill be more than glad to pick it up ship it and pay the guy and you can just pay me.

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2005-07-19 16:58, oldstangs wrote:
Cain, Hes got one and just got back from looking at it, Its in great shape and has got the wiring and trun signal cam in it. He wants $175.00 for it. I put an ididit tilt in mine it ran around 275.00 but it has a GM spline and GM wiring harness, I took pictures of what I did I could post. Let me know, If you want it Ill be more than glad to pick it up ship it and pay the guy and you can just pay me.
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

If it wouldn't be too much trouble I'd like to see a couple pics. I've got a line on one here locally that I'm going to look at Friday. I'm not holding my breath on this local one though. I saw a nice one go for $250 on ebay, so $175 doesn't seem out of line. I'll let you know one way or the other by Saturday. Thanks for taking the time to hunt one up.
[addsig]

I cut the end off , drove out the shaft, put in a bushing because shaft is GM , welded it up. The top part on the wiring is what plugs into the wiring on the steering shaft which is again GM, The bottom is off my car and the relay is for the horn.

<font size=-1>[ This Message was edited by: oldstangs on 7/21/05 8:57pm ]</font>