Headers for 67

**southern63gal** · 11-19-2005, 01:24 PM

What would be a good set of headers to run on an 85 block 302 with the stock 4 speed tranny with manual clutch linkage

**ujt389** · 11-19-2005, 06:39 PM

I think that hedman headers fit, but you have to lift the motor to get them in.

**josepheblack** · 11-20-2005, 04:46 PM

FYI,
I have a 66 mustang running a 302 with a Tremec TKO500 with the factory clutch linkage and have an issue with my clutch fork hitting the tubes (Hedman Full Length). I am looking into a different set, or a set of TRI-Ys. I am using an old style bell housing and tremec spacer.

Good Luck.

**srkepley** · 11-21-2005, 06:11 PM

You won't have any trouble when using Tri-Y's with this installation. Also, if you want a four tube header, the Hooker Competition line fits and works great as well.

**southern63gal** · 11-21-2005, 06:14 PM

Tri Ys ? Who makes them ? Any part numbers?
[addsig]

**ujt389** · 11-21-2005, 10:54 PM

Doug thorly makes some really nice tri-y's. Check it out at
www.dougsheaders.com



All content © FordMuscle, LLC. \| Ford® is a registered trademark of the Ford Motor Company. \| FordMuscle.com is not affiliated with the Ford Motor Company.