|
Re: Almost stock 289 idle?
I have a 289 in a 1966 mustang. The engine is has a Edelbrock 500 on a cast iron factory manifold, Edelbrock Performer Plus Cam, Dual exhaust 2/14. Now I have owned this car since 1980 when leaded gas was still available as well 94 octane at Chevron. The car ran and idled much better with the leaded fuel. The cam and intake combo was about the same as it is now. My car idles at 850 in park and 600 + in drive. The old setting of 6 degrees BTDC and trying to get the car to idle smooth is hard to accomplish, at least for me. I did have the car at factory settings in the 80's with leaded high octane gas. I have my distributor recurved which now gives me the advantage of setting my initial timing at 16 degrees BTDC. The engine that I rebuilt with a Crane Blueprint Series Cam with factory specs didn't idle as good as it did when I bought the car, so I went a step more and put the Edelbrock cam in , not a bad idle.
All the Best
Greg
______________________________________
1966 Sahara Beige Mustang Coupe ... my baby since 1981
|