302 351W Miller 7075-T7 Aircraft Aluminum SBF Roller Rockers

PRICE REDUCTION!

Miller 7075-T7 Aircraft Aluminum SBF Roller Rockers
For a limited time: $149/Set!

• Miller SBF Roller Rockers (same manufacturer as the $3400 Miller Boss 429 hemi rocker arms)
• Designed exclusively for small block Windsor motors (289, 302, 351W, etc.)
• Rocker body made of 7075-T7 aircraft aluminum
• 8620 billet steel trunnion axle which is rifle drilled for additional strength
• Dual trunnion flats (inverted trunnion at installation is impossible)
• Beefy oversize pin on roller tip
• Tiny pushrod cup oiling hole so as to help control top end oiling
• Chromoly hammer-forged polylocks (ie work hardened, not broached)
• Establishing proper pushrod length is a snap with the top measuring face on the rocker (instructions inlcuded).
• Available in 1.6 ratio, 7/16" or 3/8" rocker stud
• Originally $384 Retail/$310 Racer Net
• Offered here at less than half price $149/set. Complete brand new rocker arm package with chromoly polylocks and instructions. Yes, we ship international.

We install the big block version on all of our ported D0VE head conversions with great success and 100% customer satisfaction. We don't think there's a better rocker arm package for the money, as none of the other rockers offered at this price come with comparable materials, composition or technology behind them, nor will you find any other roller rocker with a rocker body made of 7075-T7 aircraft aluminum, with anywhere near the fatigue / destruct / tensile strength capabilities and the 8620 billet steel rifle drilled trunnion, all for for just $149.

ATTN SBF owners with Pedestal rocker-type heads:

These rocker arms may be installed onto your pedestal mount cylinder heads though the use of the Crane Conversion Kit:



This kit is available through Summit Racing, part number: CRN-36655-16, about $95. My biz partner does this installation on SBF's all the time and it works excellently.

PM, call or email if interested,

Paul
www.highflowdynamics.com/
highflowdynamics@earthlink.net
(310) 435-1900

Due to a large volume purchase, for a limited time we are able to offer these top notch roller rockers at a mere $149 per set! That's only 39% of suggested retail!

At this price, you will not find a roller rocker with a rocker body made of 7075 aircraft aluminum that has anywhere near the capable fatigue / destruct / tensile strength measurements and the 8620 billet steel rifle drilled trunnion.

Call, PM or Email if interested.

Paul
www.highflowdynamics.com/

highflowdynamics@earthlink.net

(435) 435-1900

VintageSpeed,

Your rockers are enroute.

Thanks for your business.

Paul

DL,

Your rockers should have arrived by now.

Thanks for your business,

Paul

Will these work on a Victor jr head, 1.55 spring?

Richard

Originally Posted by ForeverFords

Will these work on a Victor jr head, 1.55 spring?

Richard

Richard,

The answer to your question is that, yes, these rockers will clear a 1.55" diameter spring.

Paul

To any one that got a set of these rocker what did you think of them did they seam like good rockers

thanks Dave377

Hi Dave,

I would like to offer (in addition to the other's that might reply) that you can also check our ebay feedback rating for feedback from those that purchased, received, and installed these rocker arms onto their engines. I would think that anyone that knows what to look for in a quality rocker arm set and understands the proper installation would accept nothing less for the same price.

To view our ebay feedback and customer replies to the Miller Rockers, click HERE.

Paul

DC: your rockers are enroute.

JN: your rockers are enroute.

Thanks for your business guys,

Paul

Thanks Paul for your promp service and shipping

Dave 377