--- how to build 460 stroker with stock parts
--------------------------------------------------------------------------------
greg a morton - 10:17 pm on Nov. 11, 2001
need to no different combos like six cylinder
rods and pistons and so on to make big cubic inches. thanks for help
greg_a_morton@yahoo.com
----------
greg morton
--------------------------------------------------------------------------------
mavman - 10:58 pm on Nov. 11, 2001
I had a buddy build one with an offset ground 460 crank, chrysler slant six rods, and some sort of off the shelf pistons to arrive at 495 inches. That's all I know of, anyone else know more?
--------------------------------------------------------------------------------
greg a morton - 11:27 am on Nov. 12, 2001
Now come on people I have seen all kinds
of combos but I never kept notes because I
did not need them,but now I do. also if any
body knows about dave williams rod ratio
list I would like to know a link!!
----------
greg morton
--------------------------------------------------------------------------------
n2omike - 12:10 pm on Nov. 12, 2001
You can find it here...
http://www.angelfire.com/ar/dw42/
Good Luck!
----------
Mike Burch, 66 mustang real street
302 4-speed 289 heads, 10.63 @ 129.3
--------------------------------------------------------------------------------
greg a morton - 7:35 pm on Nov. 12, 2001
No body got any more good ideas???
--------------------------------------------------------------------------------
66restomod - 7:41 pm on Nov. 12, 2001
I don't have anything to input as far as strokers, but wow, Dave Williams' site is really interesting! I spent almost an hour looking at all of the different things he has to read.
-Brian
--------------------------------------------------------------------------------
greg a morton - 7:43 pm on Nov. 12, 2001
Thanks for that!
--------------------------------------------------------------------------------
TorinoGT - 7:47 pm on Nov. 12, 2001
greg...try someplace like summit racing for stroker info....and lighten up....
--------------------------------------------------------------------------------
Dave - 8:39 pm on Nov. 12, 2001
try
www.flatlanderracing.com
I saw one guy who punched out
a 460 to over 600cubes...
and you start with the crank
then all the other parts fall
into place
--------------------------------------------------------------------------------
Alan Casida - 9:02 pm on Nov. 12, 2001
My machine shop guy has a combo using a 460 crank offset ground to 4.125 stroke using pontiac rods and .030 403 olds pistons. This requires boring the 460 only .020 and this will yield 499 cui. with off the shelf parts.
You will have to fly cut the pistons for intake valve clearance.
--------------------------------------------------------------------------------
greg a morton - 10:48 pm on Nov. 12, 2001
does any body know any combos using 300six
rods or dodge slant six rods??
--------------------------------------------------------------------------------
Today
