TMD forged stroker kit

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
On 2005-11-21 12:10, 68sportcoup wrote:
these guys had the best prices i could find so far.
and scat or eagle stuff.


http://www.cnc-motorsports.com/default.asp

</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE>

Same here. Wouldn't give TMD (or Hawks, Cat, or Racepart$) the time of day. Had a few bad experiences in the past from them. Lets just say justice was served and paybacks from this ol' backwoods redneck ain't exactly the nicest thing in the world.

_________________
see the classifieds for cars for sale and parts wanted!

<font size=-1>[ This Message was edited by: mavman on 12/1/05 10:59am ]</font>

Good deal.[img]/phpBB/images/smiles/icon_tup.gif[/img] Sorry to hear you had to administer "backwoods redneck justice" but it is effective and I heartily approve.
Thanks for your input and experience....I'm checking out the links you guys provide.

Terry

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
http://www.cnc-motorsports.com/default.asp
</BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE> Heres my experiance with CNC............ Bought what was advertised as an internal balance Eagle crank for my 347. When my engine man went to balance the rotating assembly lo and behold its wayyy off...... Turned out once he hung a 28oz balancer and flexplate on it, wammo very close. Its my fault for not assembling this during the thirty day grace period but....... They did ship the wrong crank. Talked to the EAGLE rep and he said they shipped me a crank that was an old part# CNC nor Eagle gave a flip that I had to buy a new $$$ balancer just to cover their mistake. Sorry to Hi Jak your thread but if you buy parts piece by piece, do not count on the seller sending the right part..........

<font size=-1>[ This Message was edited by: 347mod on 12/14/05 11:11am ]</font>

how was the stuuff from cnc besides the mixup.
im thinking of getting a eagle balanced assembly stroker kit.
would something like this still need to be balanced,.
im thinking of one of these.


http://www.cnc-motorsports.com/produ...997&CtgID=9052




http://www.cnc-motorsports.com/produ...307&CtgID=9052





if these need balancing than that might blow my budget.
maybe i just get rods and pistons and use my crank and get it all balanced local guy here wants 300 fore balancing that sounds like alot is it.
thanks fore any and all advise
[addsig]

[addsig]

Contact Brian at www.adperformance.com

Stroker professional, excellent pricing and customer service. [img]/phpBB/images/smiles/icon_smile.gif[/img]

Got my AFR 205 heads and SCAT stroker kit from him. [img]/phpBB/images/smiles/icon_wink.gif[/img]
[addsig]