445

I had recently dynoed my sbf 445 and i thought i would share the results.

4.100 crank
6.250 rod
4.155 bore
Victor 7721 heads
15 to 1 compression
nasty solid roller set up for NOS
Super Victor
1450 cfm carb.
Moroso Vacume pump.

Considering that i blew the head gasket on the 8th pull and continued on, motor made 799 hp @ 7100 rpm & 633 tq. & 6100 rpm. I know the motor has more, but the motor was not sealing on the outside due to oil leaks and the vacume pump would not pull as much vacume. Also, that's with a Nos cam , which i made N/A pulls on the dyno.

_________________
800 N/A SBF

<font size=-1>[ This Message was edited by: 93lx on 4/7/06 8:13am ]</font>

Do you have any specs on the cam or flow numbers on the head. Ive got something similar and I'm just wondering how close I am to your numbers. Wont have a chance to run at the strip for a few months yet.

Heads flowed 369 / 260 2.18 / 1.60 valves cam is a solid roller 844 / 846 282 / 291 duration

That is one hell of a cam. Scary !

Whats it going into? That sounds like a bitchin motor.

It went into the motor that i listed above. Already dynoed.

I think he means what is the motor going in, lol

My bad, lol, it's going in a 93 hatchback. Probably around 3100 lbs.

Is the car gonna handle that kinda power and what you think it will make on the bottle ??
[addsig]

I figure the motor will react crazy to the juice being that it has a nos cam. I'm say a 200 shot will gained 250 hp.
[addsig]