a street monster

I have a 78 F250 2wd that the body rotted off of, well a trip to my good friends junkyard yielded me a new cab and it fits fairly well concidering the differences. I have it on the frame and am busy hooking up and fabricating the F250 was a 460 C6 that ran great and the new truck will retain the same with addition of some headers and a bunch of chrome. The new cab is old, it is a 1966 International 220 tractor cab and is a site to see, the fenders will have to be narrowed about 4 inches each but the actual cab is 8 inches shorter front to rear than the ford and 7 inches narrower but a few inches taller and no rust of any concern . If I can figure out how to post a few pics of this work in progress monster I'm sure ya'll will find it interesting, got some 10 x 16.5 mags for it and will be doing 12.50 x 33s and a stock ford pick up bed will sit exactly where its supposed to

THATS GOING TO BE COOL MAN
Post pic when you can I have a 64 international 4dr. (turck in signature). It has a 466 / C6 , front frame (from firewall forward) is a 72 F-100 for the Twin- I- Beam, and a 9" rearend. seats are out of a 89 Volvo front and back bench(heated front)

Motor mods

.30 over
Lunata cam 516/543 lift (mild)
roller tip rockers
ballanced bottom end
ported D3's
headers
RPM manifold
Edelbrock 750
some chrome stuff
It deffenitly has some attatude now and has suprised some folks.
Working on a some type of locking rearend or tru-track, track lock.
Tim[img]/phpBB/images/smiles/icon_spin.gif[/img]
[addsig]