Mass air conversion harness

**rgreenbank** · 03-21-2006, 05:22 PM

I've got almost everything I need for a mass air conversion for my 88 5.8L w/ C6 tranny. I'm having a hard time finding a wiring harness. Could someone point me in the right direction? I don't want to pay for the Ford kit so I've been collecting the parts.

Thanks a million,
Ron Greenbank

**rgreenbank** · 03-21-2006, 05:23 PM

**Magic** · 03-23-2006, 08:26 PM

u can get it from one of the distrubutors of Professional mass Air Systems or get it from Granatelli

[addsig]

**f150fan** · 03-28-2006, 05:14 PM

**f150fan** · 03-28-2006, 05:15 PM

rgreenbank,

Ive been looking for one too, they want like 600 bucks from PMA just for the harness, let me know what you find, tempted to just build my own but not enough time / energy.

**rgreenbank** · 03-29-2006, 10:34 PM

I'm still looking for a harness. Somebody quoted $399.00 but that is just to high for me. If you want the address I can get it tomorrow at work. I've looked at all the parts on fordfuelinjection.com and they have everything but the wire. I don't know what gauge wire you would need for everything. Injector, MAF, power and ground. Any suggestions would be appreciated.

Ron Greenbank

**rustedduster** · 04-06-2006, 11:45 AM

http://cgi.ebay.com/ebaymotors/Mass-...spagenameZWDVW

this is intended for 5.0 Mustangs that want to convert a Speed Density harness to Mass Air. i believe your exiting fuel injectors fire one bank at a time and a Mustangs fire sequentialy. this harness wont correct that, but think itll still work for you. another option is to get ahold of a harness from Painless and use a Mustang computer

_________________
duster

65 cyclone

<font size=-1>[ This Message was edited by: rustedduster on 4/7/06 1:53am ]</font>

<font size=-1>[ This Message was edited by: rustedduster on 4/7/06 1:56am ]</font>



All content © FordMuscle, LLC. \| Ford® is a registered trademark of the Ford Motor Company. \| FordMuscle.com is not affiliated with the Ford Motor Company.