351C 4V Closed chamber heads wanted

**767Jockey** · 11-12-2007, 10:34 PM

No cracks, repairs, etc. Prefer set up with screw in studs and guide plates (NOT the Crane conversion kit), will consider pedestal mounts. I'm on Long Island, NY - will pay cost of shipping. What have you got - ported, unported, stock, bare, whatever. I'll consider them. Thanks.
Doug
email me at AE340B@aol.com (That's 34zero, not 34 letter "O")

**ScreaminC** · 11-12-2007, 11:22 PM

I have a pair of 4V CC heads with screw in studs and guide plates. They have larger valves - don't recall right off the top of my head what size. The were on a Clevor, so there are screwed in plugs in the deck surface water jackets and nipples screwed into the front of the head. Easily removed/plugged if going back on a cleveland. Previous owner had some gasket matching done on them.

If interested, EMAIL me at wevie0037@yahoo.com

I can get pics, casting numbers, date codes, etc.

**767Jockey** · 11-17-2007, 07:46 PM

email sent

**gup75** · 11-17-2007, 09:25 PM

i want to roller my 1972 cleveland heads is there anything wrong with the crane conversion kit. and do i need guild plates?

**trikar** · 12-10-2007, 04:46 PM

Are you still in the market for the 4V heads?

**69fstbk** · 12-10-2007, 05:19 PM

I am what do you have PM or email thanks

**trikar** · 12-10-2007, 11:04 PM

I sent you a PM.



All content © FordMuscle, LLC. \| Ford® is a registered trademark of the Ford Motor Company. \| FordMuscle.com is not affiliated with the Ford Motor Company.