New Products

Canton Introduces New Ford EFI Inline Fuel Filter 2006+ Mustangs

Canton Introduces New Ford EFI Inline Fuel Filter 2006+ Mustangs

New from Canton Racing Products – inline fuel filters for 2006+ Mustangs with the 4.6-liter, 5.4-liter, or Coyote V8. These units have double the filtration of stock fuel filters to protect sensitive EFI systems.Read More

Holley Announces New Line of Steel & Aluminum Hays Flywheels

Holley Announces New Line of Steel & Aluminum Hays Flywheels

Holley has announced Hays' new line of tried-and-true steel and aluminum flywheels to include 1969-78 Big Block Fords, 1986-92 Small Block Chevys, and late-model Big Block Chevys. Check it out!Read More

AEM Introduces Infinity Series 3 Programmable ECU

AEM Introduces Infinity Series 3 Programmable ECU

New from AEM – the Infinity Series 3 programmable ECU. This unit will run a race, marine, or crate engine and offers fuel injection control, flex fuel compatibility, and a host of other features. Check it out!Read More

Undercover Innovations Launches Show Panels For Falcons & Rancheros

Undercover Innovations Launches Show Panels For Falcons & Rancheros

New from Undercover Innovations – show panels for the 1964-65 Ford Falcon and Ranchero. These units cover the exposed area between the radiator support and grille without hindering hood latch operations.Read More

ARP Introduces 2017 Catalog

ARP Introduces 2017 Catalog

New from ARP – the 2017 catalog. This catalog has 128 full-color pages and contains over 4,500 fastener kit numbers, including several new ones. Check it out!Read More

Stage 8 Releases Ford 9-Inch Differential Locking Fastener Kit

Stage 8 Releases Ford 9-Inch Differential Locking Fastener Kit

New from Stage 8 – the Ford 9-inch differential locking fastener kit. This kit touts Stage 8's patented grooved bolts, and a "bridge retainer" that holds ring gear bolts to the differential carrier assembly.Read More

Edelbrock Releases Max-Fire Ultra-Spark Performance Spark Plug Wires

Edelbrock Releases Max-Fire Ultra-Spark Performance Spark Plug Wires

New from Edelbrock – the Max-Fire Ultra-Spark performance spark plug wires. These offer the same high quality as model specific sets, but give users the ability to make them fit a specific V8 application perfectly.Read More

Bowler Launches Universal Hydraulic Master Cylinder Kit

Bowler Launches Universal Hydraulic Master Cylinder Kit

New from Bowler Performance – the universal hydraulic master cylinder kit. This kit works on manual transmission applications, and is a blueprinted design that is hand-built. Check it out!Read More

BMR's Chrome-Moly Double Adjustable Lower Control Arm For Mustangs

BMR’s Chrome-Moly Double Adjustable Lower Control Arm For Mustangs

New from BMR – chrome-moly double adjustable lower control arms for 1979-2004 Ford Mustangs. These control arms are TIG-welded, lightweight, and offer improved repeatability in handling. Check 'em out!Read More

RideTech Launches Mustang StreetGRIP Systems

RideTech Launches Mustang StreetGRIP Systems

New from RideTech – the StreetGRIP system for first-generation Ford Mustangs. This suspension kit offers a more modern, direct replacement solution for these classic musclecars. Check it out!Read More

Ferraro Speed Launches Bumpsteer Kit For S197 Mustangs

Ferraro Speed Launches Bumpsteer Kit For S197 Mustangs

New from Ferraro Speed – a bumpsteer kit for the S197 Mustang. This kit will fit any trim model of the 2005-14 Mustang, and has shimless, on-car adjustability so you can make changes whenever you want.Read More

McLeod Racing Debuts Muscle Car 5 Transmission For Ford Applications

McLeod Racing Debuts Muscle Car 5 Transmission For Ford Applications

New from McLeod Racing – the Muscle Car 5 small-bodied five-speed overdrive transmission for Ford applications. It uses forged steel gears and can handle up to 500 lb-ft of torque. Check it out!Read More

AEM Releases CAN Dash 7" Digital Dash Displays

AEM Releases CAN Dash 7″ Digital Dash Displays

New from AEM – the CAN Dash seven-inch Super Bright digital dash displays. Available in four configurations, these dash displays can keep you informed no matter how bright it gets outside. Check 'em out!Read More

BMR Introduces Front Chassis Brace For S550 Mustangs

BMR Introduces Front Chassis Brace For S550 Mustangs

New from BMR – the front chassis brace for S550 Mustangs. This brace is bolt-in and reinforces the K-member, reducing deflection when lateral loads are applied to the chassis and increasing steering stability.Read More

FuelTech Releases Their Next Gen Standalone EFI System

FuelTech Releases Their Next Gen Standalone EFI System

FuelTech has officially released their FT600 engine management system, and it includes features that truly make it a drag racers dream.Read More

BMR Releases Xtreme Anti-Roll Bar For S197 Mustangs

BMR Releases Xtreme Anti-Roll Bar For S197 Mustangs

New from BMR – the Xtreme anti-roll bar for 2005-2014 Mustangs. This product is made from heavy-wall 1.375-inch DOM tubing, and transfers as much power as possible to the rear wheels. Check it out!Read More

Vortech Releases Mounting Bracket Assembly For 1986-93 Mustangs

Vortech Releases Mounting Bracket Assembly For 1986-93 Mustangs

New from Vortech – a mounting bracket assembly for 1986-93 Ford Mustangs. This kit touts a billet twin-plate design and manual belt tensioner, and will work with a variety of Vortech's blowers. Check it out!Read More

Diablosport Debuts MAF.ia MAF Interface Adapter For 1996-2010 Fords

Diablosport Debuts MAF.ia MAF Interface Adapter For 1996-2010 Fords

New from Diablosport – the MAF.ia MAF Interface Adapter for 1996-2010 Ford vehicles. This device does away with maxed-out signals that prevent you from making peak horsepower at high RPMs. Check it out!Read More

Hotchkis Releases Total Vehicle System For 1967-70 Mustangs

Hotchkis Releases Total Vehicle System For 1967-70 Mustangs

New from Hotchkis – the Total Vehicle System for 1967-70 Mustangs. This kit is designed for better grip through proper camber and caster adjustment, while also lowering the vehicle up to 1.5 inches. Check it out!Read More

BMR Introduces Billet Aluminum Pivot Upgrade For S197 Watts Link

BMR Introduces Billet Aluminum Pivot Upgrade For S197 Watts Link

New from BMR – a billet aluminum pivot upgrade for the S197 Watts Link. This unit is CNC-machined from 6061-T6 billet aluminum, and is black anodized for a great, durable finish. Check it out!Read More

Load More