 |
|
Getting it sorted out |
|
 |
|
CID:351 Rearwheel HP:320@4500 Torque:280@4200 |
|
|
|
|
|
1975 Ranchero GT after a full frame off restoration. 110000 original miles. Original/rebuilt 351W and C4 |
|
 |
|
CID:351 |
|
|
|
|
65 BFX - Registered User |
1964 sprint
|
|
|
1978 302 .030 over, World jr heads, 9.5-1, Jones cam, Stinger ign, Victor jr intake with a Stage 3 Holley 650, stock bottom end with a 3.89 9 inch and 4 speed T10. |
|
 |
|
1/4 Mile:12.76 MPH:103.00 60ft:1.80 Weight:2800 CID:302 Rearwheel HP:360@6000 |
|
|
|
|
GMendez - Not Confirmed |
1968 Torino GT
|
|
|
No description available. |
|
 |
|
CID:390 |
|
|
|
|
|
Work in progress...just wanted something different to drive. 302/AT GT but I'm putting in the interior from another 500 model due to the GT stuff being rotted from the sun. Hope to one day have the $$$, time, and enegy to drop a 460/C6 combo in her and do some burn outs! |
|
 |
|
CID:302 |
|
|
|
|
|
Begining the restore by Elite Customs in St Charles, MO |
|
 |
|
CID:351 Rearwheel HP:320@4500 Torque:280@4200 |
|
|
|
|
|
My 65 mustang project. Was a straight six 200 but I decided to do a five lug and engine swap from a donor 73 Ford Maverick. Its been a ton of fun tearing into it and learning as much as I can. I striped the car down to the uni-body and re-build and restored from there up. I stripped the car and epoxy primed/sealed. Str...more |
|
 |
|
CID:302 |
|
|
|
|
|
289ci A-code, Holley 600Cfm vac. secundaries, long tube Hooker headers with flow masters, C4, 3:1, Power disc at front, Alu ET 5 spoke wheels, alu brushed center console, from the Netherlands. |
|
 |
|
CID:289 |
|
|
|
|
Falcon62 - Registered User |
1962 2-door sedan
|
|
|
She's a 1977 T-Bird Town Landau I bought in 08' for $900. Had a bad engine so I replaced it with the same 351M. Since then Ive had it in pop's back yard covered up. I'm putting in a bigger cam, new springs, new lifters, new push-rods, new full length headers, EB 4bbl carb, EB intake. The car had seat covers, dash &...more |
|
 |
|
CID:351 Rearwheel HP:200@0000 Torque:365@0000 |
|
|
|
|
|
My new project, A field find needs floor pans and alot of body work but the winter is comming. |
|
 |
|
CID:260 |
|
|
|
|
67coup - Registered User |
1967 Mustang Coupe
|
|
|
306cid,Comp Cams 281HR,355trutrac,600cfm Holley,RHS Heads,RPM Performer,Tri-Y's,C-4 Auto/Manual VB, |
|
 |
|
1/4 Mile:13.37 MPH:102.30 60ft:2.00 Weight:3130 CID:306 |
|
|
|
|
|
This is a almost exact duplicate of my first car.Which was a Fairlane and is in my profile. Waited a long time to get another. Thisone isnt going anywhere. |
|
 |
|
|
|
|
|
|
trobert3 - Registered User |
1968 500 XL Fastback
|
|
|
New 390 with elderbrock heads, erson roller rockers,31 spline axles,18 inch wheels,true trac posi,fresh rebuild on c6. |
|
 |
|
CID:390 |
|
|
|
|
|
My son's 1968 FB 289, 3 speed, now A/T. Factory bench seat, A/C, P/S, P/B |
|
 |
|
CID:289 |
|
|
|
|
